AOR AR5001D Specifiche Scaricare il pdf (Pagina 71)

5. After initialized, the receiver will be powered off automatically, and then restart.

9-14 CONFIGURE MEMORY CHANNEL ASSIGNMENT

A number of memory channels of each memory bank can be freely assigned by user between 5 ~ 95

(not exceed a total of 2000 channels.)

The default settings is 50 channels x 40 banks.

To change the number of memory channels, perform the following steps:

1. Press the [FUNC] key, and then press the [kHz] key.

2. Press the [UP] key to select “MEMORY CHANNEL ASSIGN” in reverse contrast..

3. Rotate the sub dial to select the desired memory bank.

4. Rotate the main dial to select a new number of the memory channels.

5. To accept entry, press the [ENT] key.

6. To cancel, press the [CLR] key.

10 OPTION MENU

On the option menu, squelch hysteresis, notch, noise reduction, noise blanker, voice descrambler, IF shift,

AFC, CTCSS, DCS, DTMF, pre-selector, video output, video polarity function may be configured.

10-1 LSQL HYS (LEVEL SQUELCH HYSTERISIS

)

This function is to set the depth of hysteresis for level squelch.

[Example]: Squelch level: -100 dB, Hysteresis: 6 dB

Squelch opens when the input level is above -100 dB.

Squelch will not close until the input level drops below -106 dB.

To activate the function, perform the following steps:

1. Press the [FUNC] key, and then press the [0] key.

2. Rotate the sub dial to select the hysteresis

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 94 95

Nessun commento

AOR AR5001D Specifiche Pagina 71