AOR AR2000 Manuale Utente Scaricare il pdf (Pagina 73)

AR1000 Reference

• Press AUX.

• Press PROG.

• Enter the channel number you want as the new Priority channel.

• Press ENT.

• Open up the squelch so you hear the background hiss

• Press AUX

Within two seconds, the scanner will switch channels to the Priority channel.

Press AUX again to turn off Priority mode, once you’ve determined the Priority

channel.

This attribute of the Priority mode may be problematic if you are trying to

capture a very weak signal. Sometimes you can only hear a signal if you open the

squelch so that the signal is audible within the hiss. If you have Priority mode

enabled and adjust the squelch so that you can hear the hiss on a different chan-

nel, within two seconds you will be switched to the Priority channel, whether it

has activity or not. Because you have opened the squelch so that you can hear the

hiss, when the scanner checks the Priority channel, it will hear the hiss on it also

and switch. Simply turn off Priority mode to get around this.

Priority mode is turned off each time you turn off the power. You must press

AUX again, each time you power on the scanner, if you want to have the Priority

mode in effect. The Priority channel assignment remains across power cycles,

however.

Note:

You can’t program a cleared channel as the Priority channel.

There are some unusual problems associated with the Priority channel feature. Be

sure you understand them.

Priority channel problem 1:

Once you have switched to the active Priority channel, while it is active, every key

on the scanner, except AUX, will be locked out. Even the LIGHT key will not

function. You must press AUX again to turn off Priority mode in order to get

access to the other keys. Of course, when the frequency becomes inactive, the

scanner will leave the Priority channel and you’ll get access back to all the keys.

You can easily test this by assigning the local weather channel (which usually has

continuous transmissions) as the Priority channel.

In the sequence to assign a channel as the Priority channel, after you press AUX

you must press several other keys. If, before you press PROG, the channel that is

To program a

new Priority

channel

To check the

current Priority

channel

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 90 91

Nessun commento

AOR AR2000 Manuale Utente Pagina 73